Диагностика и бортовой компьютер.

[100nx]

timursoft, нет

[reader777]

100nx, если запускается, но не работает - это уже проблема драйверов адаптера, а не программы

[E_K]

из софта я пользую nissan data scan. работает под любой виндой, без проблем и танцев с бубном. все что надо в софтине есть.

[fire002]

Приветствую. Добрался до машинки наконец, с адаптером.
Завелся только DDLReader, другой софт нивкакую.
Адаптер юсб.
Вот показатели на холостом:
http://joxi.ru/48An6JoT7WRvAO.jpg
Нажал педаль, обороты 2к, показания:
http://joxi.ru/WKAxzvoc1b8Om8.jpg
Так-же провел самодиагностику, но она какая-то странная, после запуска софта такое:

ECU 
30.12.1899 22:59:15
Get self-diagnoctic data...
 5- 5: Normal operation        0 engine starts passed.

После того как натыкал кнопок с тестами:

Get self-diagnoctic data...
 0- 0: Unknown error has happened       65 engine starts passed.
 1- 1: Camshaft position sensor / circuit       202 engine starts passed.
 0- 1: Unknown error has happened       68 engine starts passed.
 8-10: Unknown error has happened        8 engine starts passed.
 0- 0: Unknown error has happened      173 engine starts passed.
 1-12: Unknown error has happened       37 engine starts passed.
 0- 0: Unknown error has happened      233 engine starts passed.
 6- 4: Unknown error has happened       94 engine starts passed.
 5-11: Unknown error has happened       64 engine starts passed.
 0- 1: Unknown error has happened        0 engine starts passed.
15-14: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened       34 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened        1 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened       16 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened       83 engine starts passed.
 6- 1: Unknown error has happened      118 engine starts passed.
 6- 5: Misfire on cylinder 4       32 engine starts passed.
 4-15: Unknown error has happened      115 engine starts passed.
 6- 3: Unknown error has happened      105 engine starts passed.
 6-12: Unknown error has happened      108 engine starts passed.
 6-15: Unknown error has happened      103 engine starts passed.
 7- 2: Catalytic converter system problem       97 engine starts passed.
 6-13: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened       62 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened        1 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened       45 engine starts passed.
 0- 0: Unknown error has happened        0 engine starts passed.
 0- 0: Unknown error has happened      196 engine starts passed.
14- 8: Unknown error has happened      224 engine starts passed.
14- 3: Unknown error has happened      237 engine starts passed.
14-14: Unknown error has happened      241 engine starts passed.
15- 2: Unknown error has happened      232 engine starts passed.
14-10: Unknown error has happened      224 engine starts passed.
 2- 0: Unknown error has happened      225 engine starts passed.
14-11: Unknown error has happened      238 engine starts passed.
14-10: Unknown error has happened      224 engine starts passed.
 2- 0: Unknown error has happened      243 engine starts passed.
14-15: Unknown error has happened      240 engine starts passed.
14- 0: Unknown error has happened      226 engine starts passed.
14-11: Unknown error has happened      229 engine starts passed.
14-13: Unknown error has happened      232 engine starts passed.

Тест цилиндров?

ECU 
30.12.1899 22:50:28
Get self-diagnoctic data...
 5- 5: Normal operation        0 engine starts passed.
Automatic power balance test.
Cyl. No.1 :  746 rpm.
Cyl. No.2 :  760 rpm.
Cyl. No.3 :  767 rpm.
Cyl. No.4 :  763 rpm.

Что скажите?
И каким софтом можно еще попробовать проверить? Интересует тест абс и аирбагов.

[100nx]

fire002, да почти ни о чем сканы не говорят...
Бери TECU и снимай логи (записи данных) при прогретом моторе на хх и в движении - тогда и поговорим предметно

[fire002]

Собственно проблема в том, что TECU отказывается работать.
При запуске, выбираю "Адапрет RxTx (Consult 1)" далее "Nissan AT Consalt 1", пробовал и 2 других, и нифига. Не может получить данные.
Возможно как-раз из-за того, что сканер юсб

[100nx]

fire002, а возможно из-за кривых драйверов

[fire002]

Сообщение от 100nx fire002, а возможно из-за кривых драйверов

Подскажешь где взять нормальные?

[100nx]

fire002, так это, вроде всем известно:

http://www.ftdichip.com/Drivers/VCP.htm

[sanek1975]

Сейчас все рекламируют Диагностические OBD2 сканеры / elm327, но по ходу дело они в наш разъем не подойдут, там разъем идет OBD2, у нас другой, а как называется разъем на наших моделях. Можно ли сделать переходник к этой модели.